panou
Electrical
- Apr 21, 2005
- 33
Hi guys.
I have an inverter Midimaster Vector (Siemens). After start-up we have periodically trips with code F001. There is not a problem in the load. I have chosen operating mode P077=1 and the ramp-down time is 12 sec. Can you tell me your opinion ? Thanks in advance for your time.
I have an inverter Midimaster Vector (Siemens). After start-up we have periodically trips with code F001. There is not a problem in the load. I have chosen operating mode P077=1 and the ramp-down time is 12 sec. Can you tell me your opinion ? Thanks in advance for your time.