Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Side face blow-out failure and edge distance for Headed anchor/headed bar

Status
Not open for further replies.

Costru

Civil/Environmental
Joined
Sep 24, 2008
Messages
1
Location
TH
How can we optimized Side face distance (Concrete edge to Center of bar) while using headed anchor in place of hooked bar/development length. Code to be referred. ACI 318-05 Section D5.4
 
Side face blowout is a bit of an odd failure mode, but strut and tie can provide a solution. Link

"It is imperative Cunth doesn't get his hands on those codes."
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top