May 7, 2007 #1 Cansand Structural Jan 14, 2007 102 Is there anyway to show the dimensions in the visualisation module or at least in any other module other than the Sketch. Thanks
Is there anyway to show the dimensions in the visualisation module or at least in any other module other than the Sketch. Thanks
May 7, 2007 #2 brep Mechanical Feb 15, 2005 301 You can perform measurements between vertices or nodes (depending if it is geometry or mesh). Tools-Query-Distance. Upvote 0 Downvote
You can perform measurements between vertices or nodes (depending if it is geometry or mesh). Tools-Query-Distance.
May 7, 2007 Thread starter #3 Cansand Structural Jan 14, 2007 102 I want to display (print) them on the model Upvote 0 Downvote
May 8, 2007 #4 Yoman228 Marine/Ocean Mar 5, 2007 176 Cansand, answer from my experence is a "NO". if others have a different answer, I would like to know too...... Upvote 0 Downvote
Cansand, answer from my experence is a "NO". if others have a different answer, I would like to know too......
