Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Showing the dimensions

Status
Not open for further replies.
Cansand

Cansand

Structural
Joined
Jan 14, 2007
Messages
102
Location
CA
Is there anyway to show the dimensions in the visualisation module or at least in any other module other than the Sketch.
Thanks
 
Sort by date Sort by votes
You can perform measurements between vertices or nodes (depending if it is geometry or mesh). Tools-Query-Distance.
 
Upvote 0 Downvote
I want to display (print) them on the model
 
Upvote 0 Downvote
Cansand, answer from my experence is a "NO". if others have a different answer, I would like to know too......
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

mj345
  • Question Question
Selecting the arcs in ABAQUS/CAE
Replies
2
Views
364
mj345
mj345
M
  • Locked
Python script to obtain the Material name of each material in the Abaqus model
Replies
4
Views
5K
FEA way
FEA way
chinsan
  • Locked
  • Question Question
Nodal coordinates and the strains at the nodes
Replies
5
Views
681
chinsan
chinsan
E
  • Locked
  • Question Question
ABAQUS IS NOT RUNNING THE MODEL
Replies
3
Views
3K
FEA way
FEA way
vigneshr57
  • Locked
  • Question Question
Issue in Running the jobs
Replies
4
Views
764
vigneshr57
vigneshr57

Part and Inventory Search

Sponsor

Back
Top