Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Showing same dimension in multiple views on drawing.

  • Thread starter Thread starter theswede78
  • Start date Start date
T

theswede78

Guest
Hello!


Is it possible to show same dimension in multiple views using the "show model anotations" command?


I'm trying to make a table with dimensions from the model and when i put the dimension in the table the dimension disappears from the drawing. When i look in the drawing tree its suppressed and I cant find a way to bring it back.


Do anyone have a solution for this?
 
You can show dimension only once in a drawing. Otherwise it will be double dimensioned.
You can add reference dimension on other views.

If you use dimension in table or note using &dXX then the dimension will be gone from the view.
Trick around this is create a note &dXX, then put &dXX in your table then delete first note &dXX. Dimension will come back on the view.
 

Part and Inventory Search

Sponsor

Back
Top