Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Shock analysis with SRS question

Status
Not open for further replies.
tonyu47

tonyu47

Aerospace
Joined
Mar 28, 2012
Messages
1
Location
US
In the DDAM option under normal modes analysis there is a place for a spectrum file when doing a non-DDAM analysis.

What is the format for this file?

Is this the correct place to specify an arbitrary Shock Response Spectrum as the load for the analysis?

Thanks in advance,

TonyL
 
Status
Not open for further replies.

Similar threads

D
  • Locked
  • Question Question
MODAL ANALYSIS WITH FLUID
Replies
3
Views
2K
karachun
karachun
test123123
  • Locked
  • Question Question
Transient Heat Transfer with 100 Time-Dependent Data Surfaces in FEMAP
Replies
1
Views
2K
karachun
karachun
D
  • Locked
  • Question Question
Using glued to avoid stress concentration with plate elements
Replies
3
Views
4K
rb1957
rb1957
Xprivate
  • Locked
  • Question Question
Modal Analysis with contact
Replies
2
Views
2K
Xprivate
Xprivate
hhcc_im
  • Locked
  • Question Question
Failed for full nonlinear analysis after FEMAP export the analysis input file from working model
Replies
1
Views
1K
BlasMolero
BlasMolero

Part and Inventory Search

Sponsor

Back
Top