Mar 15, 2006 #1 bearisle Mechanical Joined Jun 2, 2004 Messages 77 Location US How do I shell an object and have one face open?
Mar 15, 2006 #2 MikeHalloran Mechanical Joined Aug 29, 2003 Messages 14,450 Location US Build a smaller object within, from the common face, and subtract it. Mike Halloran Pembroke Pines, FL, USA Upvote 0 Downvote
Build a smaller object within, from the common face, and subtract it. Mike Halloran Pembroke Pines, FL, USA
Mar 16, 2006 #3 TCARPENTER1 Computer Joined Sep 22, 2005 Messages 234 Hi bearisle, Use the Solidedit command-> Body option then the Shell option - follow the prompts. HTH Todd Upvote 0 Downvote
Hi bearisle, Use the Solidedit command-> Body option then the Shell option - follow the prompts. HTH Todd
Mar 16, 2006 Thread starter #4 bearisle Mechanical Joined Jun 2, 2004 Messages 77 Location US Thanks Carpenter...I had figured it out....I was doing exactly as you described, but was not selecting the face properly when removing it (I was selecting a corner which removed 2 faces). Upvote 0 Downvote
Thanks Carpenter...I had figured it out....I was doing exactly as you described, but was not selecting the face properly when removing it (I was selecting a corner which removed 2 faces).