Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

shelling an object

Status
Not open for further replies.
bearisle

bearisle

Mechanical
Joined
Jun 2, 2004
Messages
77
Location
US
How do I shell an object and have one face open?
 
Sort by date Sort by votes
Build a smaller object within, from the common face, and subtract it.



Mike Halloran
Pembroke Pines, FL, USA
 
Upvote 0 Downvote
Hi bearisle,

Use the Solidedit command-> Body option then the Shell option - follow the prompts.

HTH
Todd
 
Upvote 0 Downvote
Thanks Carpenter...I had figured it out....I was doing exactly as you described, but was not selecting the face properly when removing it (I was selecting a corner which removed 2 faces).
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

ohiocad
  • Question Question
Autocad scripts and vault
Replies
3
Views
12K
Sparweb
Sparweb
Avg_Engineer
  • Locked
  • Question Question
Subsea Tie-back analysis
Replies
2
Views
869
Avg_Engineer
Avg_Engineer
seenote2
  • Locked
  • Question Question
Viewport? How do I create an elevation view to not display objects behind my section?
Replies
8
Views
768
seenote2
seenote2
robyengIT
  • Locked
  • Question Question
drawing a curve and find the formula
Replies
8
Views
1K
IanVG
IanVG
dik
  • Locked
  • Question Question
Import and Export Plot Styles
Replies
10
Views
2K
dik
dik

Part and Inventory Search

Sponsor

Back
Top