Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Shell99 in Ansys...

  • Thread starter Thread starter dangnm
  • Start date Start date
Status
Not open for further replies.
D

dangnm

Guest
Greetings,
I am using Shell99 in ANSYS to model a box beam, which has six layers. All these layers are arranged at different angles. So for a particular shell element, I would like to know which the top and bottom layers are.

Any suggestion on this is appreciated,

Many thanks,
Vinay.


 
Sort by date Sort by votes
hi
the layer which has a number 1 is the bottom layer and the 6th layer is the top layer.

hope my answer satisfies you

bye corleon
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

O
  • Locked
  • Question Question
ansys civata
Replies
0
Views
2K
oktaeng1
O
X
  • Locked
  • Question Question
ANSYS mechanical : How to read the dimensions which are defined as function of other dimensions in UGNX as parameters in ANSYS?
Replies
0
Views
1K
xinyu3liu
X
S
  • Locked
Concrete Shrinkage modelling with ANSYS
Replies
1
Views
2K
crshears
crshears
R
  • Locked
Guidance on Settlement Analysis of Steam Generator in Oil Plant Using ANSYS
Replies
0
Views
794
Rabea-19
R
somebodyfromworld
  • Locked
  • Question Question
ACT extensions for Ansys
Replies
0
Views
1K
somebodyfromworld
somebodyfromworld

Part and Inventory Search

Sponsor

Back
Top