beachcomber
Mechanical
- Jan 19, 2005
- 1,488
We are having problems with shaded draft views.
They are OK when created but after updates or other operations they sometimes lose their shading.
It isn't consistent and sometimes the shading comes back again. It isn't just confined to 1 workstation.
We can also get similar things when printing - sometimes the print will not shade a view even if it is showing shaded on screen.
Anyone else had similar problems ?
The workstations are 3GHz Xeon Dell 690's with Nvidia FX3500 256MB graphics cards and 3GB ram.
The assemblies are relatively small.
bc.
2.4GHz Core2 Quad, 4GB RAM,
Quadro FX4600.
They are OK when created but after updates or other operations they sometimes lose their shading.
It isn't consistent and sometimes the shading comes back again. It isn't just confined to 1 workstation.
We can also get similar things when printing - sometimes the print will not shade a view even if it is showing shaded on screen.
Anyone else had similar problems ?
The workstations are 3GHz Xeon Dell 690's with Nvidia FX3500 256MB graphics cards and 3GB ram.
The assemblies are relatively small.
bc.
2.4GHz Core2 Quad, 4GB RAM,
Quadro FX4600.