Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Shaded draft views problems.

Status
Not open for further replies.

beachcomber

Mechanical
Joined
Jan 19, 2005
Messages
1,488
Location
GB
We are having problems with shaded draft views.
They are OK when created but after updates or other operations they sometimes lose their shading.
It isn't consistent and sometimes the shading comes back again. It isn't just confined to 1 workstation.
We can also get similar things when printing - sometimes the print will not shade a view even if it is showing shaded on screen.
Anyone else had similar problems ?
The workstations are 3GHz Xeon Dell 690's with Nvidia FX3500 256MB graphics cards and 3GB ram.
The assemblies are relatively small.

bc.
2.4GHz Core2 Quad, 4GB RAM,
Quadro FX4600.
 
I too happen to have some issue with the shaded draft views. Sometimes there are parts that don't get shaded at all and I can't seem to find a pattern explaning why this happens.

I'm very interrested in a solution for this.

Patrick
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top