Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Setting all active default in assemblies

Status
Not open for further replies.

alansimpson

Mechanical
Joined
Jul 8, 2000
Messages
228
Location
IE
Moved over to SE ST and can't find setting to make all parts active as default. When I try to assemble parts I find parts are not active and I have to activate.

Finding manual difficult to follow.

Getting lazy.

Any help welcome.

Thanks
 
Hi,

you mean that after open an assembly all parts are inactive? If
so, the option can be found there where it has always been:
Application button -> Open --> Type *.asm then select your
file but before pressing open set the options and press
'Save As Default'

HTH

dy
 
Thanks. Worked perfectly. Amazing how difficult to see things when they are right in front of you.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top