Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Set color of part in .key file?

Status
Not open for further replies.
Kimpan

Kimpan

Mechanical
Joined
May 30, 2008
Messages
39
Location
SE
Is it possible to set the color of a part or material in the .key file? I don´t want to run a macro each time I open prepost to change the color of each part.
 
Sort by date Sort by votes
It´s LS-Dyna I´m using by the way. No go?
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

R
  • Locked
Guidance on Settlement Analysis of Steam Generator in Oil Plant Using ANSYS
Replies
0
Views
787
Rabea-19
R
X
  • Locked
  • Question Question
ANSYS mechanical : How to read the dimensions which are defined as function of other dimensions in UGNX as parameters in ANSYS?
Replies
0
Views
1K
xinyu3liu
X
O
  • Question Question
Simulation of a screw connexion
Replies
1
Views
4K
dgeesaman
dgeesaman
AndrewSkocz
  • Locked
  • Question Question
Ansys - Solving an input file using command line
Replies
3
Views
1K
NRP99
NRP99
nashki
  • Locked
  • Question Question
UDL on the Curve of Elbow
Replies
0
Views
3K
nashki
nashki

Part and Inventory Search

Sponsor

Back
Top