May 17, 2011 #1 Lot2Learn Structural May 8, 2011 30 Are there any self drilling or self tapping fasteners which would go through a 1/2" or 3/8" thick steel. I need to connect a MC7 with a 14 ga strut.
Are there any self drilling or self tapping fasteners which would go through a 1/2" or 3/8" thick steel. I need to connect a MC7 with a 14 ga strut.
May 18, 2011 1 #2 dik Structural Apr 13, 2001 26,057 I use Teks3 or Teks5 (depending on the thickness)... self drilling and tapping fasteners for that sort of thickness. Dik Upvote 0 Downvote
I use Teks3 or Teks5 (depending on the thickness)... self drilling and tapping fasteners for that sort of thickness. Dik
