Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Self tapping fasteners 1

Status
Not open for further replies.
Lot2Learn

Lot2Learn

Structural
Joined
May 8, 2011
Messages
30
Location
US
Are there any self drilling or self tapping fasteners which would go through a 1/2" or 3/8" thick steel. I need to connect a MC7 with a 14 ga strut.
 
Sort by date Sort by votes
I use Teks3 or Teks5 (depending on the thickness)... self drilling and tapping fasteners for that sort of thickness.

Dik
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

Tmoose
  • Locked
  • Question Question
antiseize for galvanized fasteners
Replies
9
Views
1K
Tmoose
Tmoose
Abdullah J
  • Locked
  • Question Question
Is there an official reference restricts welding Gr. 8.8 fasteners ?
Replies
10
Views
875
PersonalProfile
PersonalProfile
DesEngineer4
  • Locked
  • Question Question
Need your suggestions on Fixing 2 Tones KG component with Fasteners
Replies
3
Views
367
DesEngineer4
DesEngineer4
Michel_Str
  • Locked
  • Question Question
Weathering Steel (Corten, COR-TEN) Fasteners
Replies
9
Views
2K
TugboatEng
TugboatEng
gmoney731
  • Locked
  • Question Question
Stacking Washers for Fasteners
Replies
5
Views
2K
sdz
sdz

Part and Inventory Search

Sponsor

Back
Top