Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Seismic coefficient

Status
Not open for further replies.
Isha90

Isha90

Mechanical
Joined
Dec 21, 2017
Messages
88
Location
IN
Customer [Thermal power] had provided Minimum Seismic coefficient 0.28g horizontal & 1.0g vertical & how to check structural integrity of 2” Globe & Check valve when subjected to Seismic force please,
 
Sort by date Sort by votes

Well, navy (marine) centrifugal separators for mine-sweepers and other vessels have been dropped from 15 meters down to concrete surface and tested afterwards, required to be fully operational….

 
Upvote 0 Downvote
0.28g horizontal & 1.0g vertical seem a bit odd. Usually the horizontal is larger than the vertical.

The EQ force the valves bodies will see will be from self mass and the mass of the attached piping. The valve supplier can not work out the mass of the attached pipe.
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

Ahsan96
  • Locked
  • Question Question
Flow Coefficient calculation of Choke Valves
Replies
8
Views
2K
MortenA
MortenA
johcatrac
  • Locked
  • Question Question
Production valve order of 4 identical nuclear valves. Valves required to be seismically qualified.
Replies
0
Views
482
johcatrac
johcatrac
fabiobs
  • Locked
  • Question Question
Flow coefficient according to IEC 60534 vs CFD simulation software
Replies
2
Views
399
fabiobs
fabiobs
SD12
  • Locked
  • Question Question
Kv flow coefficient
Replies
2
Views
646
moideen
moideen
gwalkerb
  • Locked
  • Question Question
Fisher Control Valve Sizing and Fp Coefficient
Replies
8
Views
1K
gwalkerb
gwalkerb

Part and Inventory Search

Sponsor

Back
Top