Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Seismic Analysis - Modeling - Non structural elements Connectiond

Status
Not open for further replies.
stan123lee

stan123lee

Civil/Environmental
Joined
Sep 14, 2008
Messages
4
Location
HK
Dear ALL,

Could anyone advise how to model the connection between the infill panel and the structural steel frame?

I would like to take into account the weight of the infill panel and its stiffness contribution, so that i could attain the natural period of the stucture correctly.

Anu syggestion?

Thanks.

 
Status
Not open for further replies.

Similar threads

Miladm2
  • Question Question
Proper Method for Modeling Offset Beam Elements
Replies
0
Views
3K
Miladm2
Miladm2
sriharsha.g
  • Locked
  • Question Question
Non Linear Push over analysis in Etabs - Solver settings and solution scheme in Non Linear parameter
Replies
2
Views
1K
sriharsha.g
sriharsha.g
Miladm2
  • Question Question
Truss Roof – Joint Force Imbalance Due to TRP Plate Modeling
Replies
4
Views
12K
Miladm2
Miladm2
Angel Vila
  • Locked
  • Question Question
SEISMIC USER DEFINED LOAD
Replies
3
Views
3K
sticksandtriangles
sticksandtriangles
X4vier
  • Locked
  • Question Question
Two-stages analysis procedure
Replies
1
Views
1K
Luceid
Luceid

Part and Inventory Search

Sponsor

Back
Top