Jun 23, 2009 #3 HgTX Civil/Environmental Aug 3, 2004 3,722 Depends where you're putting it. Could be a groove weld. Hg Eng-Tips policies: faq731-376 Upvote 0 Downvote
Jun 24, 2009 #4 btrueblood Mechanical May 26, 2004 10,018 We've found that seals make poor welders. Their flippers can't grip the gun well, and it's too much overhead in fish and ice to keep them happy. Upvote 0 Downvote
We've found that seals make poor welders. Their flippers can't grip the gun well, and it's too much overhead in fish and ice to keep them happy.
Jun 24, 2009 #5 SnTMan Mechanical Jan 22, 2005 6,824 Not to mention the language barrier, although many of our human-like welders seem to communicate mainly with squeals and grunts... Upvote 0 Downvote
Not to mention the language barrier, although many of our human-like welders seem to communicate mainly with squeals and grunts...
Jun 30, 2009 #6 Metalmeister Nuclear Mar 4, 2008 62 Depends on what Code you are using. ASME Section III, NB-4360 imposes many more requirements on the seal weld than a simple fillet. Upvote 0 Downvote
Depends on what Code you are using. ASME Section III, NB-4360 imposes many more requirements on the seal weld than a simple fillet.
