Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

SE Installation problem

Status
Not open for further replies.

rjt205

Mechanical
Joined
Jan 12, 2004
Messages
6
Location
US
While trying to install SE 15 on a machine I get a message that says a version of SE is on the system and I need to uninstall it first. There is no and never has been SE on the machine. Any suggestions
 
Check that there is no Solid Edge listed in Config Panel/Add or Remove Programs. (If there is remove it)

Then run the executable under SptTools/SECleanup on your CD prior to installation.

Fred
 
Thanks for the quick response, however it didn't do the trick. I'm still getting the same message. I did notice that there is an MSICleanup utility but there are only ones for win 9x and NT, we are running 2000 Pro. Any other sugestions?
 
Please check the entries in your system registry.
Try registry clean.

Thanks
 
I have seen this issue on Win 2000. The SECleanup.exe utility available on EDS' FTP server has worked beautifully.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top