Nov 29, 2006 #1 Baroche Civil/Environmental Nov 28, 2006 13 Does anybody know if the default relationship can be changed from "Flash Fit"? Shouldn't this feature be selectable? Thanks
Does anybody know if the default relationship can be changed from "Flash Fit"? Shouldn't this feature be selectable? Thanks
Nov 29, 2006 #2 Schipperus Mechanical Sep 26, 2005 85 The only way I know: change to V19... IJsbrand Upvote 0 Downvote
Nov 29, 2006 1 #3 donyoung Mechanical Oct 8, 2005 1,018 Hi, I don't know which version you have - V19 -- it's selectable place the second part and the within the RibbonBar select --> Options - V18 -- two .reg files should be within the ..\Program folder ffdefoff.reg -> Mate is default (FF off) ffdefon.reg --> FlashFit default When not found and Version is < 19 the following entry can be defined with the Registry to control it HKEY_CURRENT_USER\Software\Unigraphics Solutions\Solid Edge\Version 19\DEBUG DisableFlashFitDefault DWORD set to 1 --> FlashFit is disabled Set to 0 --> FF is enabled HTH dy Upvote 0 Downvote
Hi, I don't know which version you have - V19 -- it's selectable place the second part and the within the RibbonBar select --> Options - V18 -- two .reg files should be within the ..\Program folder ffdefoff.reg -> Mate is default (FF off) ffdefon.reg --> FlashFit default When not found and Version is < 19 the following entry can be defined with the Registry to control it HKEY_CURRENT_USER\Software\Unigraphics Solutions\Solid Edge\Version 19\DEBUG DisableFlashFitDefault DWORD set to 1 --> FlashFit is disabled Set to 0 --> FF is enabled HTH dy
Nov 29, 2006 #4 Schipperus Mechanical Sep 26, 2005 85 Oh I remember, wasn't it part of one of the latest updates (6 or 7)?? IJsbrand Upvote 0 Downvote
Nov 29, 2006 #5 donyoung Mechanical Oct 8, 2005 1,018 /Edit missing the key 'DisableFlashFitDefault' must be created as Dword dy Upvote 0 Downvote
Nov 29, 2006 Thread starter #6 Baroche Civil/Environmental Nov 28, 2006 13 Yes Guys I am using V18! Thanks so much for the info. This is a time saver for me! Thanks donyoung! Upvote 0 Downvote
Nov 29, 2006 Thread starter #7 Baroche Civil/Environmental Nov 28, 2006 13 /Edit missing the key 'DisableFlashFitDefault' must be created as Dword dy Yes Donyoung "IT WORKS"! thank you! Upvote 0 Downvote
/Edit missing the key 'DisableFlashFitDefault' must be created as Dword dy Yes Donyoung "IT WORKS"! thank you!
