Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Screw pump to API676

Status
Not open for further replies.

pootong

Mechanical
Joined
Feb 11, 2003
Messages
20
Location
TH
Dear All
This is my first time posting my question on this Eng-Tips, I got screw pumps installed in our new power plant. I would like to know how to make an performance acceptance test. According to API676 there is no detail criteria for this. For example; pump head, flow rate, efficiency and power input tolerance. I found the acceptance test criteria in API610 which is centrifugal pump. If anybody has suggestion please let me know.
Regards
Pootong
 
I've been told that the Hydraulic Institute Standards thoroughly covers the testing of rotary and displacement pumps. Testing of these should closely parallel the procedure for centrifugals since the objectives, methods and measurements are about the same. Besides performance, noise and vibration are also usually tested.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top