Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
SCREW PUMP CLEARANCE ..
- Thread starter P.K.P
- Start date
- Thread starter
- #3
There is no need to shout, you were heard the first time.
You can always check the operating / service manual or do an internet search.
It is a capital mistake to theorise before one has data. Insensibly one begins to twist facts to suit theories, instead of theories to suit facts. (Sherlock Holmes - A Scandal in Bohemia.)
You can always check the operating / service manual or do an internet search.
It is a capital mistake to theorise before one has data. Insensibly one begins to twist facts to suit theories, instead of theories to suit facts. (Sherlock Holmes - A Scandal in Bohemia.)
MikeHalloran
Mechanical
The only accepted way to evaluate the pump's internal condition is to _measure_ the process fluid flow under operating conditons, and compare it with the pump's performance when new.
Disassembling the pump is the wrong way to start.
Mike Halloran
Pembroke Pines, FL, USA
Disassembling the pump is the wrong way to start.
Mike Halloran
Pembroke Pines, FL, USA
- Status