Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
screening
- Thread starter bigbill
- Start date
yes by color and or by layer but ultimate ly its controled in your CTB/STB file (i recommend ctb cause you have a little more control)
but as for having a hatch that is screened at say 25% and the boundary of the hatch which is actually part of the hatch set to a screening of 100% there is no way but you can emulate it though by making one layer set to a color that in your ctb is set to 100% screening and draw either a pline or line around the edges of the object
but as for having a hatch that is screened at say 25% and the boundary of the hatch which is actually part of the hatch set to a screening of 100% there is no way but you can emulate it though by making one layer set to a color that in your ctb is set to 100% screening and draw either a pline or line around the edges of the object
- Status
Similar threads
- Locked
- Question