Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

'SapModel.PropLink.SetMultiLinearPoints' function does not run for zero yielding stiffness ratio.

Status
Not open for further replies.
Huzb

Huzb

Structural
Joined
Dec 31, 2016
Messages
3
Location
JP
It seems that 'SapModel.PropLink.SetMultiLinearPoints' function does not run for zero yielding stiffness ratio (following is an example of trilinear hysteretic curve). how to deal with it?

trilinear hysteretic curve
dap force
-0.381 -1585.2
-0.127 -1585.2
-0.030 -1204.0
0.000 0.0
0.030 1204.0
0.127 1585.2
0.381 1585.2

 
Status
Not open for further replies.

Similar threads

P
  • Question Question
Storey stiffness
Replies
1
Views
3K
GJoeRMK
GJoeRMK
A
  • Locked
  • Question Question
CSI BRIDGE "Design request" for Precast Concrete I Girder bridge does not work when the defined beam is nonprismatic !!!
Replies
0
Views
883
Abderrahmane Mche
A
K
  • Question Question
C# SAP2000 API v26.2.0 - Load Patterns Not Appearing in "Load Pattern Definitions" Table Despite Being Created
Replies
0
Views
6K
keremsari
K
tru_go
  • Locked
  • Question Question
SAP2000: Frame Releases not working
Replies
1
Views
1K
Luceid
Luceid
juandavidguzman
  • Locked
  • Question Question
SAP2000 Nonlinear Analysis Setup for Steel Design: Notial loads
Replies
2
Views
2K
STpipe
STpipe

Part and Inventory Search

Sponsor

Back
Top