Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Same Ux on an edge

Status
Not open for further replies.
saeedfazeli

saeedfazeli

Mechanical
Joined
Jul 19, 2007
Messages
2
Location
AU
Hi All
Please consider the plate with central hole tension problem. We need to apply a BC on the vertical edge that sets Ux=constant, so the vertical line should remain vertical. Then I apply a point force on edge. How could I do so? ( I use ANSYS WB )
Thanks
 
Sort by date Sort by votes
Insert a remote force on the edge where you want to apply the load. Right mouse button on the remote force and choose ...promote to remote point. In the details of the remote point change behaviour to Coupled and activate only the x DOF.
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

H
  • Locked
  • Question Question
how to apply triangular load on an area, in ANSYS Workbench static module
Replies
1
Views
3K
karachun
karachun
M
  • Locked
  • Question Question
ANSYS Mechanical Scripting: how to delete an existing heatflux?
Replies
0
Views
814
MihailW
M
nashki
  • Locked
  • Question Question
UDL on the Curve of Elbow
Replies
0
Views
3K
nashki
nashki
R
  • Locked
Guidance on Settlement Analysis of Steam Generator in Oil Plant Using ANSYS
Replies
0
Views
792
Rabea-19
R
IJR
  • Locked
  • Question Question
On how and where to insert command snippets inside Workbench mechanical
Replies
2
Views
1K
IJR
IJR

Part and Inventory Search

Sponsor

Back
Top