Eng-Tips is the largest forum for Engineering Professionals on the Internet.

Members share and learn making Eng-Tips Forums the best source of engineering information on the Internet!

  • Congratulations dmapguru on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Safe Handling of Ethylene Reference 1

Status
Not open for further replies.

sshep

Chemical
Joined
Feb 3, 2003
Messages
761
Location
US
My Friends,

20+ years ago following an ethylene decomposition incident on one of my early projects, I saw the effects of ethylene decomposition which started in a steam heater, which made its way back into the unit melting the foam glass off the piping as it progressed.

After this happened I did some research on safe handling of ethylene including: decomposition by various initiating methods (heat, 13x molsieves, compression, catalyzed by rust and copper, etc), autorefrigeration, thermal expansion, etc. I had some good reference papers with pressure and temperature curves for thermal decomosition, and general good practices. Unfortanatly this was so long ago that the traing presentation I made was on overhead slides which I have long since lost. Now I would like to create a power point training for a new project which we are about to start-up.

Can anyone point me to some good references on these type safe handling procedures? I am just starting my research. Case histories are pretty easy to find, but I am struggling to find more detailed references. Any help is appreciated.

best wishes always,
sshep

 
Thanks! Considering that I joined EngTips in Feb2003, I am sort of suprised that I missed this post. It was a pretty good discussion.

More references are still desired. Any further help is appreciated.

best wishes always,
Sean
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top