matstmp123
Materials
Bidding a stamping job with the above specs. Can anyone shed any light on what type steel this is? I have been told it was CR strip coil but have no other data.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
SAE J2392 Temper Hard #1 1
- Thread starter matstmp123
- Start date
- Status
-
1
- #2
SAE J2392 is a specification for cold rolled strip steel. Temper #1 has the following description:
very hard and springy intended for flat work not requiring cold forming.
The composition is for a carbon steel (0.25% max) with a tensile strength of ~ 620 MPa. You can purchase your own copy of the standard (your customer will require this) directly from SAE or from IHS:
very hard and springy intended for flat work not requiring cold forming.
The composition is for a carbon steel (0.25% max) with a tensile strength of ~ 620 MPa. You can purchase your own copy of the standard (your customer will require this) directly from SAE or from IHS:
- Status
Similar threads
- Locked
- Question
- Question
