Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations LittleInch on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

SA-105 SCH160 FLANGE

Status
Not open for further replies.
radd02

radd02

Industrial
Joined
Apr 30, 2013
Messages
8
Location
US
A job requirement lists normalized material. I have an MTR that lists this flange as heat treated (normalized). But the mtr copy lists the part as SA-105, not SA-105N. Does the flange itself need the "N" stamp on it for verification?
 
Sort by date Sort by votes
SA-105 doesn't require the "N" to be stamped on the flange, unless specified in the order as a supplementary requirement (S2.4).
Cheers,
John
 
Upvote 0 Downvote
Might consult the flange specification, whatever it may be.

Regards,

Mike
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

swiftworks
  • Locked
  • Question Question
7500 PSIG Hydro Test w/ 6M SA-105 Fittings (b31.3 and b16.11)
Replies
5
Views
765
swiftworks
swiftworks
Hemsel
  • Locked
SA-537 CL 2, Thickness limitation
Replies
0
Views
755
Hemsel
Hemsel
mechengineer
  • Question Question
Studding Flange Design as per Code
Replies
1
Views
3K
r6155
r6155
L
  • Locked
  • Question Question
ASME B16.5 Flange Hole Chamfering
Replies
7
Views
2K
Compositepro
Compositepro
Mechanical1991
  • Locked
  • Question Question
SA-105 Flange_MDMT -20°F
Replies
1
Views
248
r6155
r6155

Part and Inventory Search

Sponsor

Back
Top