Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations JAE on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Rubber material undercut correlation

Status
Not open for further replies.
mwall52

mwall52

Mechanical
Joined
Jul 20, 2010
Messages
1
Location
US
I am designing a rubber overmold for a part which requires some undercuts in the mold. Could anyone point me towards some information on either a mathematical correlation or actual data between material and allowable undercuts in the mold. Thanks
 
Status
Not open for further replies.

Similar threads

lucas88
  • Question Question
Question silicone rubber elastic
Replies
8
Views
12K
btrueblood
btrueblood
H
  • Locked
  • Question Question
Polyamide to EPDM rubber bonding
Replies
4
Views
6K
Henry Chiansky
H
A
  • Locked
  • Question Question
uncured silicon rubber moulding
Replies
1
Views
2K
3DDave
3DDave
AKHILESH MAURYA
  • Locked
  • Question Question
RUBBER SURFACE PROBLEM
Replies
1
Views
858
btrueblood
btrueblood
A
  • Locked
  • Question Question
Degradation of white nitrile butadiene rubber hose
Replies
2
Views
2K
TugboatEng
TugboatEng

Part and Inventory Search

Sponsor

Back
Top