Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations waross on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Rubber material undercut correlation

Status
Not open for further replies.
mwall52

mwall52

Mechanical
Jul 20, 2010
1
I am designing a rubber overmold for a part which requires some undercuts in the mold. Could anyone point me towards some information on either a mathematical correlation or actual data between material and allowable undercuts in the mold. Thanks
 
Status
Not open for further replies.

Similar threads

H
  • Locked
  • Question
Polyamide to EPDM rubber bonding
Replies
4
Views
6K
Henry Chiansky
H
A
  • Locked
  • Question
uncured silicon rubber moulding
Replies
1
Views
2K
3DDave
3DDave
AKHILESH MAURYA
  • Locked
  • Question
RUBBER SURFACE PROBLEM
Replies
1
Views
752
btrueblood
btrueblood
A
  • Locked
  • Question
Degradation of white nitrile butadiene rubber hose
Replies
2
Views
1K
TugboatEng
TugboatEng
Aleksandra60
  • Locked
  • Question
Books on Rubber Technology available 1
Replies
0
Views
634
Aleksandra60
Aleksandra60

Part and Inventory Search

Sponsor

Back
Top Bottom