Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations JAE on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Rubber curing systems
- Thread starter samster06
- Start date
Elastomer General Purpose Fast cure
NR TBBS 0,5 MBTS 0,5
TMTD 0,2 ZMDC 0,3
S 2,7 S 2,0
SBR MBTS 1,5 TBBS 1,0
CUMATE 0,2 CUMATE 0,3
S 2,0 S 1,7
NBR MBTS 2,0 MBT 1,5
TMTD 1,0 ZMDC 1,5
S 1,5 S 1,5
EPDM MBT 1,5 DPTT 0,8
TMTD 1,0 TEDC 0,8
TETD 0,5 TMTD 0,8
S 1,5 MBT 1,5
S 2,0
IIR MBT 1,0 MBTS 1,0
TMTD 2,0 CADMATE 1,0
S 1,5 TEDC 1,0
S 2,0
CR DOTG 1,0 VANAX PML 1,5
TMTM 1,0 CaO 2,0
S 1,0
CSM TMTD 2,0 DPTT 2,0
S 1,0
NR TBBS 0,5 MBTS 0,5
TMTD 0,2 ZMDC 0,3
S 2,7 S 2,0
SBR MBTS 1,5 TBBS 1,0
CUMATE 0,2 CUMATE 0,3
S 2,0 S 1,7
NBR MBTS 2,0 MBT 1,5
TMTD 1,0 ZMDC 1,5
S 1,5 S 1,5
EPDM MBT 1,5 DPTT 0,8
TMTD 1,0 TEDC 0,8
TETD 0,5 TMTD 0,8
S 1,5 MBT 1,5
S 2,0
IIR MBT 1,0 MBTS 1,0
TMTD 2,0 CADMATE 1,0
S 1,5 TEDC 1,0
S 2,0
CR DOTG 1,0 VANAX PML 1,5
TMTM 1,0 CaO 2,0
S 1,0
CSM TMTD 2,0 DPTT 2,0
S 1,0
The R. T, Vanderbilt Handbook would be the best source for this information. There are many, many curing systems and it lists the most common for each type of polymer. appliction information is also included. I believe the Handbook is available "on line"==you can run a search via Dogpile, Google, etc
- Status