pardal
Automotive
- Oct 17, 2001
- 444
As per HVAC method the the rectangular to round equivalence of duct is given by the following formula
b=(1.3*(A1*A2)^.625)/(A1+A2)^.25
It say that the both ducts have the same friction loos.
But from hydraulic books say that the hydraulic ratio shall be consider.
H ratio= area/wetperimeter
What is the diference, or are they two unequal concepts ???
Pardal
b=(1.3*(A1*A2)^.625)/(A1+A2)^.25
It say that the both ducts have the same friction loos.
But from hydraulic books say that the hydraulic ratio shall be consider.
H ratio= area/wetperimeter
What is the diference, or are they two unequal concepts ???
Pardal
