Guest
Hi everybody,
I wanna know how to attach the blade to the rotor.What method to use?
I wanna know how to attach the blade to the rotor.What method to use?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Dear Loella,
Hope your question means about fixing of turbine blade to the rotor. There are many types of turbine blades with different types of root configuration. Example to say is the fir tree type root, t-slot type etc. This blades are inserted in to the rotor which will have the female mating part of the blate root. The end blades are fixed by reveting, cocking or welding. All the blades are further fixed using shroud-riveting/rolled in wiring, metal wiring etc.
Regards,
V.Venkat
Hope your question means about fixing of turbine blade to the rotor. There are many types of turbine blades with different types of root configuration. Example to say is the fir tree type root, t-slot type etc. This blades are inserted in to the rotor which will have the female mating part of the blate root. The end blades are fixed by reveting, cocking or welding. All the blades are further fixed using shroud-riveting/rolled in wiring, metal wiring etc.
Regards,
V.Venkat
- Status
Similar threads
- Question
- Question
- Locked
- Question
