ranawaseem
Civil/Environmental
Please guide me about calculating the rotational stiffness factor for soil. How we calculate this and what are the values used for this factor normally?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations JAE on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Rotational stiffness of soil 1
- Thread starter ranawaseem
- Start date
- Status
-
1
- #2
Guest262653
Geotechnical
Please check page 7.2-14 of the WSDOT Bridge Design Manual M 23-50.12:
JoshPlumSE
Structural
Are you talking about a spread footing, a pile or drilled pier or what?
You can also download the software DFSAP by WSDOT. The method as shown in the reference by avscorreia is also implemented in DFSAP program.
But this program is best suited for shafts not small diameter piles.
But this program is best suited for shafts not small diameter piles.
- Status
Similar threads
- Question
- Question