Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Root area for bolts with 10 thread per inch

Status
Not open for further replies.
Mandeep1

Mandeep1

Mechanical
Joined
Feb 22, 2006
Messages
43
Location
US
Hi,

I am looking for some reference for the bolt root area for bolts with 10 threads per inch. The TEMA standard has series 8 bolts above 1in.

This is for 11/8 nominal size bolts.

Thanks.

best regards,
Mandeep Singh
 
Sort by date Sort by votes
Machinery's Handbook might have what you are looking for.
 
Upvote 0 Downvote
Thank you Bunji51.

best regards,
Mandeep Singh
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

yurachv
  • Question Question
Plate marking as per SA-480
Replies
5
Views
4K
Geoff13
Geoff13
T
  • Question Question
Help Understanding Area Distribution Around Stays in EN 12953 Boiler Standard (Clause 10.2.8)
Replies
0
Views
7K
Theodoros Benai
T
sftyvlv1
  • Locked
  • Question Question
Stay bolts
Replies
0
Views
1K
sftyvlv1
sftyvlv1
T
  • Locked
  • Question Question
1800mm Long bolts clamping flanges
Replies
6
Views
3K
Trestala
Trestala
F
  • Question Question
RT requirement as per ASME B31.1
Replies
1
Views
1K
David3399
D

Part and Inventory Search

Sponsor

Back
Top