Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Rock Anchors for Uplift

Status
Not open for further replies.

PSIDELT96

Civil/Environmental
Joined
Feb 7, 2007
Messages
2
Location
US
Does anyone know where I can find some typical details for rock anchors used for resisting uplift? Specifically looking for details showing the rock anchor/footing connection and tensile test setups.
 
Check out NavFacs 7.2 as found on SlideRuleEra's website - you can actually do a google search for NAVFAC 7.2 and find free downloads in a number of locations. This is a good place to start. (Some might say this should be in one of the geotechnical posts and it should be - but, really, almost all geotechs read all the civil posts too.) This was discussed some in a recent post in one of the geo threads.
 
Check with the tendon suppliers. They have much info available.
 
See thread256-179284
 
I ran into this in Egypt. We used the tendon manufacturers info. and monitored pull-outs very closely until we had a solid base line to ensure their effectiveness.

Good Luck,

Rick Hassett, P.E.

R.A. Hassett, P.E.
rah1616@hotmail.com
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top