robertson QL-deck

[dwray]

Does anyone have information on Robertson QL-21-20 floor deck. I am checking a floor which was built in the late 60's, early 70's. I know that the deck is 3" deep with 2 1/2" concrete on top of that. I need to know the span ratings and the profile of this deck. Any help would be appreciated. Thanks.

 

[JedClampett]

I've got catalogue cuts and ICBO information. How do you want it transmitted?

 

[dwray]

Thanks. However you can. .pdf or .doc would be fine.

 

[dwray]

Do you need my email address or can you send it to this site?

 

[JedClampett]

Fax would be easier, but I'll need an Email address if I have to scan them.

 

[dwray]

My fax is 704 561 8700, Att: Dan Wray
My email is dwray@littleonline.com

Thanks.

 

[JedClampett]

I found this on the web. I also have the 1974 edition. Is this what you want?

http://www.icc-es.org/reports/pdf_files/ICBO-ES/2739.pdf

I also have some other catalogue information that I could fax you.

 

[dwray]

I think I need the '74 edition. I need info for QL-21-20 deck.

 

[dwray]

That was exactly what I needed. Thanks Jed.

 

[lexim]

hi,

Just to let you know if this will be of any use towards your enquiry, check modern steel construction site via

http://www.aisc.org

and paste this up in the solutions section.

I will do the same from my end.
aileme (Structural)