Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations KootK on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Retaining wall

Status
Not open for further replies.

StewardMM

Civil/Environmental
Mar 5, 2012
37
Do we need to design a retaining wall that is just 3m in length? is there a rule of thumb for that?
Thanks.
 
Replies continue below

Recommended for you

I am not aware of a rule of thumb regarding the length but generally it doesn't matter the length. If I recall correctly some codes don't require a design by a licensed professional if it is real short (such as less than 3 feet) in height but that depends on the local codes and building inspector. Hope this helps a little.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor