Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Results from ANSYS to ABAQUS

Status
Not open for further replies.
JanPipora

JanPipora

Materials
Joined
Mar 22, 2007
Messages
5
Location
AT
Hallo dear colleagues,
I would like to use the results (nodal temperatures from ANSYS model) to ABAQUS for the consequent stress analysis. Is there somebody with the experiene with this data transfer?
Thanks a lot
Jan
 
Status
Not open for further replies.

Similar threads

Oluwakay
  • Locked
  • Question Question
error message from abaqus.
Replies
3
Views
2K
FEA way
FEA way
FEA_User
  • Locked
  • Question Question
Conversion Ansys to Abaqus
Replies
3
Views
497
FEA way
FEA way
R
  • Locked
Abaqus: transferring solution field from one instance to another between steps within same analysis.
Replies
2
Views
4K
Ron_ron
R
S
  • Question Question
Stress values are more compared to experimental results and cracks are not formed on concrete for DOUBLE PUNCH TEST simulation in abaqus software
Replies
7
Views
5K
Shreyas M
S
vikram manoj
  • Question Question
Abaqus-Isight
Replies
5
Views
17K
snow83
S

Part and Inventory Search

Sponsor

Back
Top