Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

restricted pack mechanism in cross over connector

Status
Not open for further replies.
prasenjith

prasenjith

Mechanical
Joined
Feb 12, 2018
Messages
15
Location
SA
Guys can any one explain what is restricted pack mechanism,. i first came to know about this from the design requirement in API 6A crossover connector scope. what are the design inputs to be taken to carry out the design calculation
 
Status
Not open for further replies.

Similar threads

Motivated Apprentice
  • Locked
  • Question Question
Diameter in ASME IX
Replies
2
Views
999
Motivated Apprentice
Motivated Apprentice
Drilling Integrity Super.
  • Locked
Formula for Calculating Basic Allowable Stresses in ASME B31.3
Replies
2
Views
5K
Geoff13
Geoff13
isoca
  • Locked
  • Question Question
Information to be reported in a CMTR
Replies
0
Views
1K
isoca
isoca
T
  • Question Question
Figure 323.2.2-2 (Reduction in Lowest Exemption Temperature for Steels Without Impact Testing) of ASME B31.3
Replies
0
Views
7K
Tommy2025
T
M
  • Locked
  • Question Question
SCL Placement for Fillet Welds in ASME VIII Div. 2 DBA
Replies
10
Views
3K
Mecat24
M

Part and Inventory Search

Sponsor

Back
Top