Jan 12, 2011 #1 minion Industrial Jan 12, 2011 2 Does anyone have a drawing of a standard plastic resin pellet. Thanks
Jan 12, 2011 #2 patprimmer New member Nov 1, 2002 13,816 1) There is no std for plastic resin pellets. 2) They are extremely simple but range between a simple cylinder to a pillow shape. 3) Dia and length and distortion at the cut edge varies from manufacturer to manufacturer and from batch to batch and even sometimes within a batch Regards Pat See FAQ731-376 for tips on use of eng-tips by professional engineers & http://eng-tips.com/market.cfmfor site rules Upvote 0 Downvote
1) There is no std for plastic resin pellets. 2) They are extremely simple but range between a simple cylinder to a pillow shape. 3) Dia and length and distortion at the cut edge varies from manufacturer to manufacturer and from batch to batch and even sometimes within a batch Regards Pat See FAQ731-376 for tips on use of eng-tips by professional engineers & http://eng-tips.com/market.cfmfor site rules
Jan 12, 2011 #3 Demon3 Materials Jun 6, 2005 1,850 You can see a picture here: http://www.nanosilasd.com/ In the bowls. Chris DeArmitt PhD FRSC CChem http://www.phantomplastics.comConsultant to the plastics industry Upvote 0 Downvote
You can see a picture here: http://www.nanosilasd.com/ In the bowls. Chris DeArmitt PhD FRSC CChem http://www.phantomplastics.comConsultant to the plastics industry
Jan 12, 2011 #4 Pud Mechanical Mar 26, 2003 2,707 Or a sphere (acetal)... http://www.tynevalleyplastics.co.uk Upvote 0 Downvote
Jan 13, 2011 Thread starter #5 minion Industrial Jan 12, 2011 2 Thanks for your input Upvote 0 Downvote
