RENDERING...Q&A and GALLERY

[CPiotrowski]

None of those links worked for me tomislav.


Hey ZAKI...

 

[tomislav]

Hi Piotrowski,


Hmm, I can see pictures - maybe is problem with firewall or? In attachment send i pictures as zip.


Regards

2007-03-14_105705_pic1.zip


2007-03-14_105857_pic2.zip


2007-03-14_105934_pic3.zip


2007-03-14_110020_pic4.zip

 

[muadib3d]

what is the device?

what it does? What is the designation?

 

[pjw]

Itis a spaceship surely?

 

[tomislav]

It is endoscope for stomach examination. It sounds ugly and it is very ugly

 

[CPiotrowski]

I was gonna say it looks like the housing for a borescope. Very nice model, especially in the exploded view you can really see the details. Were you looking for some advice or just showing the model?

 

[tomislav]

I have contact with medical service and this device was a prototype.

 

[Zaki]

Hi Piotrowsky


How r u man?? do some thing, there is no competetion after discussing a whole year. whats about ur cars models??

 

[CPiotrowski]

I currently have two separate projects going on...the Scuba Goggles and my personal design that I'm working on having manufactured by summer. I just havent had any time to do anything else. As far as a competition, I would like to see a basic modeling competition. Something simple.

 

[prohammy]

Zaki/CP,


What about a competition based on what AHA-D was talking about in


[url]http://www.mcadcentral.com/proe/forum/forum_posts.asp?TID=33 512&PN=1[/url]


Looks pretty interesting. Could be something to challange the SW guys with as well......and could be fun for all you rendering guys


Just a thought


Kev

 

[speckofdustin]

How about something like what these guys are doing (primarily with solidworks)?

http://www.productdesignforums.com/index.php?s=c90f7dd8df5b7 457750f8fc4cd78c26a&showforum=25

Look near the top of the page at the 3D Modeling challenges.

Every month, they pick a difficult shape and challenge each other to model it. There are no prizes that I know of, but I think the people who participate learn a lot.

Dustin

 

[design-engine]

Dustin,

do you use solidworks? Did I change your opinion with that 4 hour free Pro/E surfacing workshop in Dallas with respect to modeling Pro/E vs SolidWorks?

 

[speckofdustin]

Hey Bart,

No, not a big Solidworks user. Haven't used it since '98 or so. Just thought productdesignforums.com had a good example of a modeling/rendering challenge.

Your workshop a year or two ago was great though. I've modeled in Pro/E for several projects since then. Render in StudioTools, Maya/mr, or Maxwell depending on time and the needs of each project.

Is Design-Engine.com going to hold a Photoreal competition this year?

Good to hear from you.






Edited by: speckofdustin

 

[CPiotrowski]

We should just have all our users put a request down for a model they think would be a good one for a challenge. Maybe if someone has time they can start a thread requesting ideas for a modeling competition. I am incredibly busy right now or I would do it myself.

 

[mahtab_msa]

Good Evening everyone

Here are images of our model of F - 35 fighter plane. This was a group project ( 3 members including myself ) for Pro Engineer Design Exhibition category of First All Pakistan Mechanical Engineering Competition 2007 organised by GIK Institute, Pakistan. Our project won the 2nd runners-up prize

We modeled the main body ( outer surface ) and sub assemblies/ mechanisms like engine, vertical landing mechanism, cockpit , landing gears mechanism, flappers

I worked on the outer surface ( used style feature ) , landing gears mechanism , and cockpit assembly.

Images of all sub-assemblies are here 2007-04-07_135735_f_-_35_images.rar(Size of images other than those shown below was bigger, so i am uploading as rar)



View attachment 3374



View attachment 3375





View attachment 3376





Edited by: mahtab_msa

 

[skwasim_smile]

hiii,


Great work Mahtab_msi

nice model

 

[CPiotrowski]

Model looks real nice. Sorry guys...been busy. Trying to finish the final design of my invention is proving to be a hard task by ones-self.

 

[design-engine]

looks like there might be some g2 continuity on the fuselage. Are you getting lift on the leading edge of the wings? Basically you tie two conic curves together on the leading edge both with different RO values.

You don't have a boundary layer diverter on the two inlets...

Also, what stealth angels did you use? Was that not a part of your assignment? Maybe you are just happy to play with Pro/E but I hope your not an Aerodynamic Engineering Student.

"It is just sculpture if it is not functional" Said by an employee at Design-engine looking at my Pro/CABLE work that did not tie to RSD.


Edited by: design-engine

 

[CPiotrowski]

Wasn't it suppose to be a sculpture? Or model if you will?

 

[mahtab_msa]

thanks for the appreciation and comments

Yes it is a model or sculpture ... or approximate shape of body and different parts ....
we used pictures of main body and othe parts to create approximate representation of real parts. No technical details. our basic goal was to include differnet techniques of Pro E in our model.