Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Remove the sulfureted hydrogen -- Help!!!

Status
Not open for further replies.

xieyin

Chemical
Joined
Oct 16, 2001
Messages
1
Location
CN
Could any chemical engineers tell me whether there is a way to remove the sulfureted hydrogen(h2s) from the gas (H2 60%,CH4 30%,CO 9.6%, H2S 0.4% (v)) around normal pressure(106KPa(absolute))? If you know and can tell me something about it, I will be grateful!
Thank you!
 
Your question is much to broard

There are noumerous ways to revome H2S from various types of "gas". The optimal solution depends a lot on your application. Is that H2S a contaminent in a synthesis gas?

Best Regards

Morten
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top