Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations waross on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Remove the sulfureted hydrogen -- Help!!!

Status
Not open for further replies.

xieyin

Chemical
Oct 16, 2001
1
Could any chemical engineers tell me whether there is a way to remove the sulfureted hydrogen(h2s) from the gas (H2 60%,CH4 30%,CO 9.6%, H2S 0.4% (v)) around normal pressure(106KPa(absolute))? If you know and can tell me something about it, I will be grateful!
Thank you!
 
Replies continue below

Recommended for you

Your question is much to broard

There are noumerous ways to revome H2S from various types of "gas". The optimal solution depends a lot on your application. Is that H2S a contaminent in a synthesis gas?

Best Regards

Morten
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor