Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Remove Ordinate Leader Lines 1

Status
Not open for further replies.

TylerL

Mechanical
Joined
Aug 28, 2012
Messages
4
Location
US
Hi All,

Can anyone tell me how to remove these annoying ordinate leader lines? I feel like I've dug through all the menu options to no avail.

download.aspx


In case my upload doesn't work, I have leader lines going from the ordinate to the dimension (perpendicular), which are really cluttering my drawing. Any guidance would be much appreciated.
 
Sorry about that. I'm on NX 7.5.
 
How annoying !
I really on't think the default should be "on".
I haven't worked with ordinate dimensions yet in NX7.5, so I am glad to see this before I did.
 
Thank you guys for your help! I finally got rid of those pesky leader lines.

My mistake was with object selection. I had been trying to edit the style(Show Dimension Line checkbox) of the individual dinmensional callouts rather than editing the style of the ordinate itself. Makes sense. Thanks again.
 
I assume that the default setting comes from the customer defaults.
The "show dimension line"=on is the ISO-appearance.

What is your customer default setting : Drafting - General - Standard - Drafting standard = ?
- I guess that is can be avoided by setting this to ASME ?

Regards,
Tomas
 
As I had it, Drafting Standard = ISO(Shipped)

I've already changed the drawings in question, but I will use ASME(Shipped) for my drafting standard in the next drawing and see what happens.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top