I am looking for help in designing a remote data terminal to collect employee in and out times. I want the capability to interface with the host computer using rs232, lan, and wireless. I want to interface with the terminal using keypad and magnetic strip reader. Thanks.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Remote Data Terminal
- Thread starter woods
- Start date
jbartos
Electrical
- Jan 15, 2000
- 6,440
Suggestions:
1. Initially, suitable products and their offerors could be identified, perhaps over
and type Readers: Magnetic Card under Product / Service, which will return about 78 companies to inquire about magnetic cards, readers and communication. Some have tech support, application notes, and experience with many similar applications that you have in mind.
2. Other things are cost, size, communication hardware/software, communication speed, etc. that are not mentioned in your initial posting.
1. Initially, suitable products and their offerors could be identified, perhaps over
and type Readers: Magnetic Card under Product / Service, which will return about 78 companies to inquire about magnetic cards, readers and communication. Some have tech support, application notes, and experience with many similar applications that you have in mind.
2. Other things are cost, size, communication hardware/software, communication speed, etc. that are not mentioned in your initial posting.
- Status
Similar threads
- Locked
- Question
