relation to create individual values on multiple parts

[engtim]

I've created an assembly that includes the same part multiple times. I want to have a part feature with one value for the first part, and the same feature at a different value for the second part. I've set up the relation for the first part (d428:124=PARAMETER), but it changes both parts to the parameter value. Can I create parameter driven relations to change the same feature on the part to different values? Thanks for any help!

 

[grimmy65]

Engtim, it sounds like you have a perfect use for a family table. Look into it in ProE help and you should find that it will do what you are asking for.

 

[robertib]

The alternative if Flexibility - also in the help files.

 

[PeterStock]

If the part needs to be manufactured to the different values, then use the family table. If the part adjusts to fit the different values, then use the flexibility. I use flexibility to get springs, orings etc to fit where they are used.

Peter Stockhausen
Senior Design Analyst (Checker)
Infotech Aerospace Services

http://www.infotechpr.net