Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Regulating valve with integrated check valve

Status
Not open for further replies.

tigertommy

Industrial
Joined
Jul 21, 2004
Messages
14
Location
DK


I´m looking for the above valve, should be stainless, female 1/2" thread? The reason for the built in is that we have limited space?

Regards, Tommy
 
GAS OR LIQUID...PRESSURE OR FLOW...BSP,NPT,SAE?
 
10 Bar working pressure,
Liquid.
BSP
 
I'm going to take some guesses...

I assume it's a flow control that you need...

and I assume that you are in the U.K somewhere...

If my assumptions are correct...you will find the part you require at ISIS Fluid Control...part number 204052.

This part number is for a 1/2" BSP 316 stainless steel flow control valve with integrated check valve. The working pressure is 400 BAR...but I don't think 10 BAR will be a problem.

If my assumptions are wrong and you do need a pressure relief valve with a check valve...you will have to build one...if you are not in the U.K...?????

Hydromech
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top