tigertommy
Industrial
I´m looking for the above valve, should be stainless, female 1/2" thread? The reason for the built in is that we have limited space?
Regards, Tommy
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Regulating valve with integrated check valve
- Thread starter tigertommy
- Start date
- Status
I´m looking for the above valve, should be stainless, female 1/2" thread? The reason for the built in is that we have limited space?
Regards, Tommy
- Thread starter
- #3
I'm going to take some guesses...
I assume it's a flow control that you need...
and I assume that you are in the U.K somewhere...
If my assumptions are correct...you will find the part you require at ISIS Fluid Control...part number 204052.
This part number is for a 1/2" BSP 316 stainless steel flow control valve with integrated check valve. The working pressure is 400 BAR...but I don't think 10 BAR will be a problem.
If my assumptions are wrong and you do need a pressure relief valve with a check valve...you will have to build one...if you are not in the U.K...?????
Hydromech
I assume it's a flow control that you need...
and I assume that you are in the U.K somewhere...
If my assumptions are correct...you will find the part you require at ISIS Fluid Control...part number 204052.
This part number is for a 1/2" BSP 316 stainless steel flow control valve with integrated check valve. The working pressure is 400 BAR...but I don't think 10 BAR will be a problem.
If my assumptions are wrong and you do need a pressure relief valve with a check valve...you will have to build one...if you are not in the U.K...?????
Hydromech
- Status
Similar threads
- Question
