Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Regarding WPS /PQR as per API 1104

Status
Not open for further replies.

Nilesh 07

Mechanical
Joined
Feb 9, 2019
Messages
1
Location
NG
Dear Experts,

I have a qualified WPS/PQR as per API 1104 for Material as below.
Material (1) - API 5L X42 (PSL 2)
Material (2) - ASTM A694 F42

My question is can i used the same WPS/PQR for Material as below.
Material (1) - API 5L X42 (PSL 2)
Material (2) - API 5L X42 (PSL 2)

Process is same, thickness is also same.


Please reply.

Thanks.
 
Nilesh,
API 1104 is based on Group numbers for WPS/PQR.
You need to investigate yourself which Groups your materials fall into and then you will have your answer,
Regards,
Shane
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top